|Topic Review (Newest First)|
|10-30-2011 04:05 PM|
Is it a current product? I don't see it on their web site (UK or US) and as many forum members are in the Colonies...British Electonics still bear the mark of Lucas here, they're not extremely popular.
In the US, once I've had two of something fail under warranty, I'd ask for a full refund expecting there's something defective in the design or manufacture, that I don't want to deal with.
|10-30-2011 06:28 AM|
|mitiempo||Doesn't sound like it could be your fault.|
|10-30-2011 05:16 AM|
I wired it according to the manufacture's diagram to separate batteries through apropraite breakers using the recommended wire guage.
|10-28-2011 07:35 PM|
I have no experience with Sterling chargers.
But if it worked properly and no wiring was changed and both units failed maybe the design is at fault.
How it it wired?
|10-28-2011 02:19 PM|
Nobody else has run into this? No ideas?
I'm completely stumped.
|10-18-2011 08:10 AM|
Sterling Procharge Ultra battery charger
We bought a new Sterling Procharge Ultra battery charger, installed it and set it according to the instructions. For the first few months it seemed to charge okay and then it stopped. The charger was on but it didn't charge voltage and the indicator showed 00. The only way to get it working again was to turn it off and on again.
After going through this a couple of times (each time it was after a month or two of what seemed to be normal charging), I contacted Sterling (the company) and the battery charger was replaced under warranty.
Now the replacement battery charger is going through exactly the same behaviour. It stops charging. Charger is on but doesn't charge voltage and indicator shows 00. I "reset" the battery charger by turning it off and on and then it goes back to working again.
Does anybody have any ideas as to what the problem is?
Here is a picture of the charger indicators when it stops charging.