The short version, I used lots of coats of pigmented epoxy which I then faired down, sanded, wet sanded and polished. Came out looking gelcoat. Glossy. No odors.
10-30-2011 05:57 PM
new fridge box - what finish for interior?
I'm building a fridge box for Hello World. I've finished the fiberglassing on the interior of the box and I'm ready to put a finish on. I was planning on using epoxy mixed with white pigment to finish the walls but it's not going well. Coverage is not great and I get a lot of air bubbles. Does anyone have a better recommendation on a food safe finish that will adhere to cured fiberglass laid up with epoxy. I'm assuming gelcoats won't adhere to an epoxy layup. Is that true?