|Topic Review (Newest First)|
|04-02-2016 10:01 PM|
Re: Navico WP5000
Originally Posted by Yachttie View Post
|04-02-2016 09:47 PM|
Re: Navico WP5000
Originally Posted by tdw View Post
I have a wp5000 & I am looking for a spare belt or two. I also live in Sydney. I need 506XL. Are you interested in selling one.
|11-21-2011 11:17 PM|
|Kasidah||If you are interested in selling the unit I would be interested in buying it..........|
|08-26-2011 07:46 AM|
I tried sending a PM, but don't have required 15 posts yet.
Would you mind sending a picture of your pedestal mount? Thank you
Sanibel FL USA
|06-06-2011 01:58 AM|
|TrevorT||I have a wp5000 and the mounting is quite simple. It should be easy to make one depending on where you want to mount it: pedestal or or side or floor. You can download the manual from here Downloads for WP5000 Wheelpilot | Simrad Yachting let me know if you want photos of my pedestal installation|
|05-22-2011 07:08 PM|
Originally Posted by Geddesjf View Post
There is no way that you could adapt/convert a TP5000 to a WP5000. Very different animal indeed.
I'll answer your PM later on but in short the only part of mine that is seemingly unserviceable or at least in some way faulty is the compass. I did have some trouble with belt slipping but after cleaning up and servicing the wheel attachment itself it seemed to be OK the last time I used it. Unfortunately the fluxgate went insane about that time and I've not had it operating since. I have spare belts.
|05-22-2011 11:47 AM|
Hey everyone sorry i didn't respond sooner.
tdw.. i'll pm you
FDR14127.. the WP5000 is a wheel pilot.
I had found one on craigs list that i got excited about but the seller never got back to me.
|05-22-2011 05:34 AM|
Originally Posted by FDR14127 View Post
|05-21-2011 11:52 PM|
|FDR14127||I have a Navico TP5000 with about 5hrs use on it. I have been looking for the accessories since I would like to drive it off my navigation software. No joy and Simrad apparently has lost the design prints. (see if I buy any of their gear again). What is a WP5000? Does it have a junction box? Or the hand held programmer? Will it work with the TP series? All you would need to mount mine is the pipe mit the holes to set the pin on the tiller in. All else fails we can make a copy of mine, a drilled piece of pvc pipe would do in a pinch. When you get back to Sneaky Lake, give me a shout and we can get together and solve this problem. I am in Orchard Park and sail out of Niagara on the Lake.|
|05-19-2011 07:03 PM|
I do in fact have a WP5000, fully intact but with a problematic fluxgate.
The bad news is that its in Australia.
If you don't sort this out in a reasonable time let me know.
|This thread has more than 10 replies. Click here to review the whole thread.|