|Topic Review (Newest First)|
|09-20-2006 10:40 AM|
Originally Posted by Rockter
|09-20-2006 05:54 AM|
|Rockter||I have found that it was very difficult to keep the zincs on the shaft. Those wee zinc fish you see run over the side seemed more reliable, if less convenient. Just clip it onto the shaft or coupling and drape it over the side.|
|09-19-2006 11:53 PM|
Originally Posted by henry2
SMT does not make an adaptor for the Sailprop, only the Max-Prop and Autoprop.
Try VariProp, who service the Sailprop:
Also try Island Packet, as they apparently sell the zinc for Sailprop:
|09-19-2006 11:28 PM|
feathering prop zincs
You might try looking at the www.smtinc.net web site. They make adaptors for several feathering props that allow standard cone zincs to be put on.
|07-25-2001 09:37 AM|
Zincs for Sail Prop feathering prop
I have a Sail Prop feathering prop on my Crealock 34. I used to get zincs for it from ANP, Inc., in Stafford, TX, or from a dealer in Annapolis, MD, but both are now out of business. Does anyone know where I can obtain zincs for this prop? The props are manufactured in Germany I believe.
Thanks for the information. My e-mail address is firstname.lastname@example.org.