|Topic Review (Newest First)|
|02-20-2012 07:51 PM|
Most likely the float needle valve is stuck.
A quick fix involves tapping the float bowl with a screw driver handle (works on an Atomic 4 Zenith carb).
The main cause can be crud in your fuel supply. Check or pump out your fuel tank. Look for E10 phase separation floating under the fuel.
|02-20-2012 07:38 PM|
|Faster||Kinda sounds like flooding, esp if raw fuel is escaping. Sorry not to be more specific...|
|02-20-2012 06:53 PM|
Palmer 60 troubleshooting
Hi all, I have a 1974 Islander 30 MK II with a Palmer 60 marine engine. Recently I was motoring along and the engine died with no warning, after a brief panic we were able to restart, this happened a second time, after restarting we headed in only to have it die just outside our slip, good luck, we coasted in. Plenty of fuel, with the key on I checked the fuel pump and it was pumping and fuel was flowing through the visual filter. I reached along the starboard side of the engine and placed my hand under the carb and gas was being pushed out the carb throat. Is this caused by a stuck needle valve in the carb or what????? Any help or suggestions would be great.
thanks, and Happy Sailing,,,,,,,,,,,,Rick