SailNet Community - Reply to Topic

   Search Sailnet:

 forums  store  


Quick Menu
Forums           
Articles          
Galleries        
Boat Reviews  
Classifieds     
Search SailNet 
Boat Search (new)

Shop the
SailNet Store
Anchor Locker
Boatbuilding & Repair
Charts
Clothing
Electrical
Electronics
Engine
Hatches and Portlights
Interior And Galley
Maintenance
Marine Electronics
Navigation
Other Items
Plumbing and Pumps
Rigging
Safety
Sailing Hardware
Trailer & Watersports
Clearance Items

Advertise Here






Go Back   SailNet Community > On Board > Gear & Maintenance > Engines > Gas > Atomic 4 > Exhaust Manifold outlet threads
 Not a Member? 


Thread: Exhaust Manifold outlet threads Reply to Thread
Title:
  

By choosing to post the reply below you agree to the rules you agreed to when joining Sailnet.
Click Here to view those rules.

Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the SailNet Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
Please note: After entering 3 characters a list of Usernames already in use will appear and the list will disappear once a valid Username is entered.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Click here to view the posting rules you are bound to when clicking the
'Submit Reply' button below


Additional Options
Miscellaneous Options

Click here to view the posting rules you are bound to when clicking the
'Submit Reply' button below


Topic Review (Newest First)
06-09-2012 02:14 PM
mickeyrouse
Re: Exhaust Manifold outlet threads

Same thing happened to me. Helicoils, no problem
03-31-2012 11:41 PM
Capt Len
Re: Exhaust Manifold outlet threads

So I thought about a spool made of two matching flanges and a suitable dia pipe (about 1&1/4 " long;weld it up and bolt onto manifold permanently. Exhaust riser thru bolts to other end and can be removed easily when needed. Can change angle of the dangle if that's a help. Just a thought.
03-31-2012 01:17 PM
ccriders
Re: Exhaust Manifold outlet threads

After carefully measuring the amount of stripped threads and the amount of good threads remaining, I found that I had almost twice as many useable threads as were stripped out. So, I decided to go the longer bolt route and was able to get enough torque to fully seat the flange against the manifold. I'm fairly confident that this is going to work, but need to get a CO monitor to be sure there are no vapor leaks. The water leaks are stopped.
Thanks for your advice. If I were to go the helix or larger bolt route, I would have to remove the manifold and who knows what that would lead to. KISS.
John
03-28-2012 09:47 AM
alanr77
Re: Exhaust Manifold outlet threads

Unfortunately, on the A-4, the bolts holding this flange do not go all the way through. So you can't use a thru bolt. After looking at the flange on my engine, being that is is a very low stress point, I would imagine heli coils would work. I just always looked at heli coils as a temporary fix.
03-27-2012 01:52 PM
Capt Len
Re: Exhaust Manifold outlet threads

When I make up a 2 flange exhaust joint I use thru bolts and nuts so this is never a problem.May be difficult to retro tho.
03-25-2012 02:59 PM
travlineasy
Re: Exhaust Manifold outlet threads

Quote:
Originally Posted by sebez View Post
use a helicoil thread repair, it easy, fast and strong

ditto!
03-25-2012 10:29 AM
alanr77
Re: Exhaust Manifold outlet threads

Another option would be to get a tap and die set (always good to have) and re tap the threads to a slightly larger size. I'm thinking metric. That way the fix is permanent. The only thing you have to watch is the thickness of the material you are tapping. I have always been hesitant to use heli coils on things like exhaust manifold, intake, head or high stress bolts. FWIW. AR
03-24-2012 07:30 PM
sebez Use a helicoil thread repair, it easy, fast and strong
03-24-2012 02:58 PM
ccriders
Exhaust Manifold outlet threads

Had some one work on my A4 exhaust, only to have the lower bolt that holds the flange that connects the dry stack to the exhaust manifold pull out taking the threads in the manifold with it.
Upon inspection I saw that someone previously used a shorter bolt on the lower side than was used on the upper, by about 1/4 of an inch. It appears that the first 1/4 inch of threads came out with the bolt, but at least that much remains in the manifold.
How do I proceed from here?
Worst case is a new manifold and flang, etc.
Next I guess is to remove manifold and have a helix installed.
Last would be to use what is there only get a longer bolt that uses the deepest 1/4 inch of threads. Is this advisable?

Dang, I'm missing some great sailing weather!
John

 
Posting Rules
You may post new threads
You may post replies
You may post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -4. The time now is 06:27 AM.

Add to My Yahoo!         
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012

The SailNet.com store is owned and operated by a company independent of the SailNet.com forum. You are now leaving the SailNet forum. Click OK to continue or Cancel to return to the SailNet forum.