|Topic Review (Newest First)|
|05-07-2012 04:57 PM|
Re: Cal 39 & Bill Lapworth
Surveyor is working for you, right? Broker is trying to make money.
You might go over to the Cal area at Sailnet: Cal - SailNet Community
|05-05-2012 08:20 PM|
Re: Cal 39 & Bill Lapworth
I was wondering if you can help me. I was looking at a Cal 39 for sale in Merit Island. The seller does not want to give up any money on the sale. I had the boat surveyed and one of the issues was the rudder wobble. The survey said that it needs a new bushing. The broker says there is a wood block mounted under the emergency tiller access that wore out. is this true, is there a wood block that holds the rudder post or is this guy just trying to do a quick fix to sell the boat. I am an engineer and wood does not seem to good wear surface. if you know of this or if you have any suggestions or where I can get more information it would be appreciated.
|09-11-2011 11:40 AM|
How was the crossing to Australia? Is your Cal equipped with wind-vane steering? If so, what type is it and how did it perform for you. I'd be interested in knowing more about your boats set-up and outfitting.
I also have a Cal 39 (1982 MRK III) that my wife and I are sailing in Mexico. One of the issues we had when we purchased the boat was deterioration of the headliner around some of the opening ports due to minor leakage, as well as overall deterioration due to aging. We looked into options for restoration and opted to use upholstered sectional panels. These were attached to 1" fir strips (the coach roof was divided along the width into four sections), which were glued and screwed into the roof. The panels were constructed of 1/8" marine plywood covered with thin foam padding and marine grade Naugahyde. These were attached to the fir strips using industrial grade Velcro self-adhesive strips which were attached to both the fir strips and upholstered panels with staples.
The panels stopped at the bulkhead that separates the main salon from the vee-berth. The area covering the sidewalls was padded and glued in place and extended from the outboard side of the cabin overhead hand rails to under the galley (starboard; to the overhead teak rail above the cabinets and shelf) and tucked as far under the remaining cabinets above the nav-station and those in the salon. The underside of the upper cabinets (two on each side of the salon) and the pair of open shelves (two per side) were individually treated with fir strips and custom fitted upholstered pieces.
The hull of the quarter berth was also covered, gluing it in place and the overhead was put in place using the panel approach.
Taking time to layout the fir strips and cutting the plywood panels to fit (breaking the length up into two pieces) is time consuming and requires attention to detail (especially around the hatch opening and mast opening). With the padding and upholstery stretched around these panels, you'll find when doing the final installation the reveals around each of the panels will be tight and look great. The trim pieces at the ends of the cabin and those around the hatchway and mast will also serve to hide the finished ends of each of the panels. You'll have to reshape some of these to insure room for the panels to be sandwiched to the roof top.
It is a moderately large project to undertake, but the advantage is that it provides a warm interior; adds to noise suppression; hides wiring and hardware attachment points on the coach roof; and, is easily removed for any changes to hardware or wiring.
There is a discussion here in Sailnet you might be interested in reading. It can be found here: Head liner replacement help - Cruisers & Sailing Forums
Good luck. I'd be interested in hearing more about your boat and the progress you're making.
|09-10-2011 11:26 PM|
I sailed a Cal 39' from Panama to Australia last year via a string of South Pacific islands. It was the adventure of a lifetime and 'Dagmar' was the perfect boat to make the crossing with, not only does she sail well but she is also a comfortable and trusty home. Now in Australia I am looking to do some work on her (mainly cosmetic) and sell her. I guess seeing as the boats are no longer being made, neither are the parts. My main concern is the ceiling in the main saloon- it is looking very shabby but I am not sure what to do with it short of ripping it all out. It is made of a type of vinyl, does anyone know if there is some paint I can use on it? Do other owners have the same type of material on their ceilings?
|11-12-2009 01:45 PM|
Spade rudder, skeg rudder or keel mounted rudder. It all depends on how it is built. There are many skeg mounted rudders where the rudder post is strong and the skeg is weak. If you go to a big boatyard and look at the boats on the hard you will find that in some cases the rudder is strengthening the skeg, not the other way around. Shake a few and you will see what I mean, especially the ones with a smaller skeg. While a spade is vulnerable to damage from a good hit while sailing, if it is designed and built properly it should not be a problem. As for an emergency rudder, which is a good idea on any offshore boat regardless of rudder design, some self steering vanes like the Monitor can be used as an emergency rudder.
|11-12-2009 01:28 PM|
I am a big fan of the Lapworth and his earlier boats, but I have never liked the way that the Cal 39 sailed. I found them to have quirky sailing characteristics and be hard boats to handle, especially short handed. They do offer nicer creature comforts than the earlier boats.
|11-12-2009 12:27 PM|
The Cal 39 is a decent boat, but as with many types of boats, they have their problems. Deck core deterioration seems to be a chronic issue with the Cal 39's, and there's one hauled out in town here that lost it's rudder in a recent blow. I've heard of this on others also.
Check any boat your considering purchasing carefully.
|11-12-2009 11:00 AM|
|neophytecruiser||I believe the Cal 40, besides being a foot longer than the 39, has a larger cockpit (shorter cabin) and is 2000 lbs. lighter. Both are great boats, as are all Lapworth designs.|
|06-11-2009 09:15 AM|
Originally Posted by starlightventure View Post
|06-11-2009 05:16 AM|
|chall03||bheintz, I believe the email lists have been since discontinued.|
|This thread has more than 10 replies. Click here to review the whole thread.|