SailNet Community banner
  • SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more!

I like this Sabre 28 BUT.....

10K views 9 replies 6 participants last post by  Sabreman 
#1 ·
I was looking at a Sabre 28 yesterday and came away really impressed with the whole boat design and reviews. Took some pictures but there are two things that really concern me regarding this Sabre and has to do with the Chainplates which show signs of water intrusion and the cabin floor (one of the bilge covers falls into the bilge as it looks like the supporting board is gone. See pictures.

Seems like a good price so maybe it's just too good to be true. The rest of the boat looks great and I do not see water intrusion anywhere else. All doors close perfectly but the mast is down as the boat is on the hard.

Thanks for any comments suggestions. I don't want to throw away $3-500 on a survey just to be told everything needs to be redone. BTW...how much to re-do the sole and bulkheads?
 

Attachments

See less See more
3
#2 ·
The photos concern me too! I would bet that you have bulkhead rot judging by those leaks.
Can you get at them with an ice-pick and see if you can tell how bad. Or sound them out.

With the mast down and no tension on the shrouds, the hull might not reveal it. But if the rig were up and tuned, it could show dimples in the hull around any weak bulkheads.

With the floor, you'd have to open it up and see if the stringers were affected..I'm guessing so...

Cost to fix, depends on who's dong the work. At yard rates of $90.00/ hour you could be looking at a very hefty tab. If you do all the old removal, cut new bulkheads, grind out the old tabbing yourself you could save a few bucks. ( you might want to get a pattern from the old bulkhead before you knock it out)

Then you'd have to tab in the new. Chainplates could have some corrosion, you'd have to pull them to see. The core and deck could be wet and soft around the penetrations. You could sound that out now. I would be very careful, unless the price reflects the amount of potential remediation that you would be facing. The good news is, that if you were to do this work and everything else looks good, you would have a nice sabre.

Though, someone who let this damage occur might likely ignore a number of other things.
So I'd look everywhere. Caveat emptor.
 
#4 ·
Though, someone who let this damage occur might likely ignore a number of other things.
So I'd look everywhere. Caveat emptor.
Tempest is dead on with this...could easily be more than what the boat is selling for....and you will not know what is bad, until you get in to it, and by then you are committed....

IF you are good at boat woodwork, have the tools and a place to work....I might consider it.....

but with MANY similar boats for sale....I would look elsewhere....

Yahoo sabre group has an active group of experts. And Sabreman here on SN, can tell you how much work it can be, as he did a ton on his 38....and it is near flawless
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top