At 3700# displacement; should be no trouble to find an axle set to deal w/the load. I'd go 6k#gross.... more or less. You'll need supports at third points (minimum); making the frame near to 8'. An 8' tongue will get you to the prow. Longer would be better Add tongue braces, a hitch assembly, winch and a set of lights/bar to clamp to the stern and yer set.
It's awful close ta over-wide ta begin with; so I'd make sure there's no excess past the hull line. Looks like yer gonna need near 3 feet clearance for the fin keel.
You *can* cut and weld, cancha?
10-16-2012 12:45 AM
Lake Superior Sailor
Re: 24' mirage trailer
Building a trailer is not that hard, just expensive..Dale ----And then theres the title !
10-15-2012 06:04 PM
24' mirage trailer
Looking to purchase a 24' mirage. Problem is....does not come with a trailer. Are there any used mirage trailers out there? If not, how difficult is it to modify a trailer? Thanks for your input.