|Topic Review (Newest First)|
|11-04-2012 02:30 AM|
Re: Mixer for the yanmar 2qm20h exhaust
If the bolts are really in that tough a condition you really ought to fix that... you don't want that part 'falling off' at any point.
It's probably a casting so fixing it (patching) may be problematic though it might be brazable. If you can reuse the mounting flange fabricating your own elbow is not that big a deal if you have access to a welder's services.
|11-04-2012 01:26 AM|
Mixer for the yanmar 2qm20h exhaust
can i patch it. it has a small hole in it , im sure the bolts holding it on will fail if i try to remove it