SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   O'Day (http://www.sailnet.com/forums/oday/)
-   -   Headsail Roller Furling (http://www.sailnet.com/forums/oday/17921-headsail-roller-furling.html)

lyonsfin 07-04-2006 09:44 PM

Headsail Roller Furling
 
I have purchased a O25 w/ roller furling jib. My second O25, but
first furling gear. I believe it is an older CDI unit. It has an
internal halyard in the luff that is very long when the sail is
raised. Just above the drum is a cleat port & starboard on the
furler, and at the base of furler there is an opening that allows a
line to feed through. I assume the tack of the sail (which is fitted
w/2 small lines) ties at the base and that the halyard somehow is
attached to one or both of the jamcleats abouve the furler, but below
the luff. There is a lot of extra halyard at this point with the jib
raised, I am not sure what do with it? Any input on the arrangements
I described?
Thanks.


All times are GMT -4. The time now is 06:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012