Compression Post by Thomas Wright

mcollins07 · #1 (**permalink**) 01-23-2007

I am replacing/upgrading my compression post. Thomas Wright has an article on the web where he uses a 3" SS tube with an all-thread and nut of the inside diameter. I was told that he frequents this forum. Since his article suggests that his supplier is also in the Houston area, I am trying to contact Thomas Wright to find his supplier. Or, if you know of a supplier of 3" or 4" 316 SS tubing, all-threads, and nuts in the houston area, I would appreciate the info.

Michael

camaraderie · #2 (**permalink**) 01-23-2007

Mike...I don't remember a post by someone of that name...of course he may be anonymous. BUT...more likely...he hangs out on the Pacific Seacraft E-mail list here...look under resources on the top menu and then go to mail list and follow the links.

PBzeer · #3 (**permalink**) 01-23-2007

If this concerned a Crealock 37 at Clear Lake, I know who you're speaking of.

DaveMancini · #4 (**permalink**) 01-23-2007

Here is your artical:

http://www.worldwidewiley.com/Share/...2020040911.pdf