SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Pacific Seacraft (http://www.sailnet.com/forums/pacific-seacraft/)
-   -   Crealock 37 headsail sheeting (http://www.sailnet.com/forums/pacific-seacraft/77547-crealock-37-headsail-sheeting.html)

brokesailor 08-14-2011 05:00 PM

Crealock 37 headsail sheeting
 
1 Attachment(s)
Is the headsail sheet supposed to go around the block and then to the winch? As you can see in the picture if I do that I run the risk of ripping off the engine blower exhaust port (happened once).

teejayevans 08-14-2011 05:43 PM

Yes, it should go through the block (winches may be designed to only handle strain from 1 direction), the engine vent should be safe unless you get a lot of slack in the line and it suddenly the sail fills, even then I think the vent should be able to handle it.
Tom

brokesailor 08-14-2011 06:07 PM

Thats a replacement the old one got ripped off during a tack at seatrials.

teejayevans 08-15-2011 04:32 PM

I guess the easiest solution would be to put a SS bar across the gap above the vent to prevent line from getting under the vent.
Tom

arisatx 08-15-2011 10:08 PM

You could also get a 2nd fairlead on the track or maybe rig a barber hauler to clear the cowl.


All times are GMT -4. The time now is 07:41 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012