SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Pacific Seacraft (http://www.sailnet.com/forums/pacific-seacraft/)
-   -   PSC34. Sterntube Diameter. (http://www.sailnet.com/forums/pacific-seacraft/83810-psc34-sterntube-diameter.html)

YankeePSC34 02-12-2012 12:03 PM

PSC34. Sterntube Diameter.
 
I sail a PSC34 built in 1994. My plan is to replace the cutlass bearing and the stuffing box with a PSS shaft seal before she goes back in the water. After reading all the informative threads and posts I feel well prepared for a diy job. I need to order the parts and want to verify the dimensions:
- cutlass bearing: I.D. = 1; O.D. = 1-3/8; L = 4
- PSS shaft seal: I.D. = 1; stern tube diameter ?????

I am presently far away from the boat and if a fellow PSC34 sailor could help me out here? Thanks.

Wolfgang

S/V Yankee

Norstar 02-15-2012 06:35 AM

If you have the same setup as on our 1990 34 the cutlass bearing part # is E00700 by Morse Marine. The listed dimensions are 1 X 1.375 X 4
The bearing is a press fit and pretty snug so the stern tube would be just a tad over 1.375
Hope that helps and good luck with the project.

John S
PSC 34 #201
Norstar


All times are GMT -4. The time now is 10:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012