SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   S2 (http://www.sailnet.com/forums/s2/)
-   -   S2 8.0 boom parts (http://www.sailnet.com/forums/s2/35797-s2-8-0-boom-parts.html)

timangiel 08-06-2007 11:28 AM

S2 8.0 boom parts
 
I have a 1979 S2 8.0B and there are no markings on the mast or boom to indicate the manufacturer. On the forward end of the boom there is part I would like to replace. I'm not sure what it is really called, but I think it is called a gooseneck casting. One of the ears that holds the tack pin is busted off. Does anyone have any idea who the OEM was or where I can get a replacement?? Thanks.

dorourke 08-06-2007 12:39 PM

This lead might help you. I believe the boom and mast sere made by Kenion Spars, they don't make the rigging anymore. The referral article on the website I've pasted should give you a good start to finding the manufacturer who now supplies the hardware.

http://www.angelfire.com/mi/loosecru...ageletter.html

JohnF261 10-16-2007 08:24 AM

This won't help you but my gooseneck was corroded and hanging by a thread. After haul out I took it out from the boom and gave it to friend who replicated it beautifully out of stainless for a case of beer!

Tartan34C 10-16-2007 08:37 AM

Both RigRite and Dwyer are a good source for the gooseneck casting.
All the best,
Robert Gainer

P8dawg 10-16-2007 07:26 PM

That sounds familiar
 
I also have the exact same problem on my boom. I was planning on machining my own replacement, but if you find a cheap fix, please let me know, thanks.


All times are GMT -4. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012