SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Sailboat Design and Construction (http://www.sailnet.com/forums/sailboat-design-construction/)
-   -   Bristol channel Cuttter build (long) (http://www.sailnet.com/forums/sailboat-design-construction/96822-bristol-channel-cuttter-build-long.html)

deniseO30 02-20-2013 07:39 PM

Bristol channel Cuttter build (long)
 
Loved watching this build using glass hull and traditional wood for much of the rest!
<object width="420" height="315"><param name="movie" value="http://www.youtube.com/v/YXdcIEoKNuI?version=3&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/YXdcIEoKNuI?version=3&amp;hl=en_US" type="application/x-shockwave-flash" width="420" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>

SloopJonB 02-23-2013 03:35 PM

Re: Bristol channel Cuttter build (long)
 
An acquaintance of mine built those here under license back in the 80's. Doug put bonded on straight teak decks on his which really made the boats. He also had some really beautiful bronze castings that combined stanchion bases with bulwark supports - they eliminated those heavy blocks holding up the bulwarks.

There are few boats that look & feel so shippy or which pull at the heartstrings quite like a BCC.

I was heartened to see that Morse agreed with me and used plain old exterior fir ply for the interior partitions. :)


All times are GMT -4. The time now is 05:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012