Advice setting up for single handling - SailNet Community
SailNet FAQ This forum is specifically on the Sailnet Website and how to do certain things on the website. Please note - any other threads will be deleted.

 
LinkBack Thread Tools
post #1 of 4 Old 08-11-2010 Thread Starter
Junior Member
 
Join Date: Jun 2008
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
Advice setting up for single handling

My boat is a 23' newport venture.She is cutter rigged.My current set up for handling the jib sheets is there is regular cleat on each side of the aft cabintop.This setup is awkward for me when single handling as I have to stretch/reach forward to take a wrap on the cleat and maintain the tiller at the same time.I would like to swap out those cleats for a clam cleat with internal fairlead.The question becomes,,,when I pop out the working line while sitting comfortably at the tiller,I risk the now lazy jib sheet of falling back down into the cleat and catching while sheeting in on the other side.
Clamcleats - Cleat Information
I have seen clam cleats with a spring gate that would prevent this from happening,but again they are manual and I would have tyo move forward.
What would be a better setup??
Thanks
Kimana is offline  
Quote Quick Reply Share with Facebook
Sponsored Links
Advertisement
 
post #2 of 4 Old 08-11-2010
Moderator
 
Jeff_H's Avatar
 
Join Date: Feb 2000
Location: Annapolis, Md
Posts: 6,904
Thanks: 5
Thanked 151 Times in 124 Posts
Rep Power: 10
     
I think you would be better served by 'cam cleats' Harken: Cam Fairleads rather than 'Clam Cleats' Clamcleats. Cam Cleats come in a number of configurations and you should be able to find one that works for you. I would suggest that you might also want to use a ratcheting block for the sheet if you don't have winches. RF56101 |Ronstan Marine Division

Jeff


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Curmudgeon at Large- and rhinestone in the rough, sailing my Farr 11.6 on the Chesapeake Bay
Jeff_H is offline  
Quote Quick Reply Share with Facebook
post #3 of 4 Old 08-11-2010 Thread Starter
Junior Member
 
Join Date: Jun 2008
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
re:single handling

Thanks Jeff
I like your suggestion about the rachet blocks as I have never seen them.I can't at the present figure out how one would rig them up for my jib sheets application.Would I need two?Would I use one with a continuous line?Can you point me to an online link on a good set up.Should I have posted this somewhere else?Feel free to move for maximum exposure.Thanks Jeff
Kimana is offline  
Quote Quick Reply Share with Facebook
post #4 of 4 Old 08-11-2010
I don't discuss my member
 
zz4gta's Avatar
 
Join Date: Aug 2007
Location: Chesapeake Bay
Posts: 2,530
Thanks: 0
Thanked 31 Times in 31 Posts
Rep Power: 8
 
Not sure if I'd put ratchet blocks on a 23 footer cutter rig. The can't be THAT loaded up. But I second Jeff's suggestion on the cam cleats. V-cleats or clam cleats always suck a line into them when you don't want them to.

Merit 25 # 764 "Audrey"
zz4gta is offline  
Quote Quick Reply Share with Facebook
Reply

Quick Reply
Message:
Options

By choosing to post the reply above you agree to the rules you agreed to when joining Sailnet.
Click Here to view those rules.

Register Now



In order to be able to post messages on the SailNet Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
Please note: After entering 3 characters a list of Usernames already in use will appear and the list will disappear once a valid Username is entered.


User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome