Connecting a ais rc10 to a raymarine c70

[RUI C]

Hello

any one can explain how do i connect a ais rc10 to a c70 raymarine?

Thanks

rui c

[xymotic]

Originally Posted by RUI C

Hello

any one can explain how do i connect a ais rc10 to a c70 raymarine?

Thanks

rui c

we need more information.

I'm not familiar with the rc10, but looking at the web page it says it does NMEA.

so the connection should be a straightfoward NMEA wiring with the out on the AIS going to the IN on the c70.

HOWEVER, many AIS recievers use a different baud rate (speed) and if that's the case you may need a multiplexor.

[RUI C]

Thanks. I have done the NMEA wiring connections but the Raymarine C70 does not recognize the AIS signal!

Rui C

[night0wl]

Check the C70 for NMEA port speeds...you may need to set it to 38400

[r.furborough]

then you need to set the 2D overlay to show the AIS targets

[xymotic]

+1 to what they said above, make sure both units are communicating at same "baud" or speed, and enable ais on ray unir and let us know how you fare.