Flying my spinnaker - Page 2 - SailNet Community
Seamanship & Navigation Forum devoted to seamanship and navigation topics, including paper and electronic charting tools.

Reply
 
LinkBack Thread Tools
post #11 of 19 Old 06-25-2010 Thread Starter
Old Fart
 
DwayneSpeer's Avatar
 
Join Date: Oct 2003
Location: Pasco, WA, USA
Posts: 514
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 12
 
Smile Thanks

Gee and I'd made a really cool covering from leather to protect the turnbuckle on the babystay (I threw away the piece of white plastic pipe that was covering it when I bought the boat). Oh well, I guess I will "put it away" when I'm planning to fly the spinnaker.

I went looking for the blocks that I'm supposed to have near the shrouds as Sailingfool noted since I didn't remember having any such hardware. Well, I'll be darn there were the padeyes for them right where they should be and I had the blocks tucked away in my spares locker. "Bright light over head" Now I know what they're for.

Thanks for all the help guys!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Hey, can one of you guys pass me a crab?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
DwayneSpeer is offline  
Quote Quick Reply Share with Facebook
Sponsored Links
Advertisement
 
post #12 of 19 Old 07-22-2010
Junior Member
 
Join Date: Jun 2010
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
Pearson 10m Foredeck / Spinnaker

The 10M is a great boat, I've had mine for for about five years now and have sadly only flown the spinnaker about 2-3 X a year.
Some might say; (including my wife) "you can get 8.5 knots on a reach, whatdoya need a spinnaker for" - Because fast is fun, I reply, and sometimes we have to go downwind.

I've a favor to ask of you and others who might be reading. In your thread you mentioned a baby stay. I've got a track that runs the length of the fore deck - right down the middle, and was wondering what the heck this was for?
Are they meant to be used as a mount point for a baby stay, or is it meant for something else?
I've asked another 10M owner in my area and he wasn;t sure either ....

I know my boat was raced aggressively in her younger years, given the number of sails I got with her, any other comments are welcomed.
Also if anyone has pictures of this thing being used as a stay or.......?
They're worth 1000 words.....
10M2Bill is offline  
Quote Quick Reply Share with Facebook
post #13 of 19 Old 07-22-2010
Member
 
Join Date: Sep 2008
Posts: 94
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 7
 
Bill,

I doubt you have a baby stay on your 10M. But then again you might. I will try and attach one or two pics. Note that if you have baby stay on deck, there will also be a supporting mechanism below decks. The first picture shows you the baby stay with a bit of blue tap flickering in the wind. The second one shows the supporting rod underneath the deck.

The track on the foredeck can be used for fitting up a staysail. I have the track too. There is an eye on the mast around 4-5 feet below the top of the mast where a block can be fitted. The staysail has a wire luff and can be raised on its own. The eye for the foot of the sail can be fitted on the track on the fore deck. You can slide the eye forward on the track to put the tension on the staysail's luff.

Hope that helps.
Attached Thumbnails
20080901_140048_3728_S.jpg   DSC05487_s.jpg  
SeaFever2000 is offline  
Quote Quick Reply Share with Facebook
post #14 of 19 Old 07-23-2010
Junior Member
 
Join Date: Jun 2010
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
10M Spinnaker / Baby Stay

Hey Dwayne,

Thanks for the RSVP, Dan Pfeiffer (of Pearson 10M Website fame) has the attachment enclosed from the Pearson Brochure, I've looked at a million time but never noticed the staysail positioning.

QUestion is, does this stay sail require the supposrting mechanism (below decks) or is that mechanism just for the baby stay?

Hmmmm.
Attached Thumbnails
10M.jpg  
10M2Bill is offline  
Quote Quick Reply Share with Facebook
post #15 of 19 Old 07-28-2010 Thread Starter
Old Fart
 
DwayneSpeer's Avatar
 
Join Date: Oct 2003
Location: Pasco, WA, USA
Posts: 514
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 12
 
Babystay vs staysail

If you look closely at the first photo of my boat at the dock you can see the babystay just ahead of the mast. It is anchored below deck. It is attached to the mast just below the spreader. I'm told it is there to limit the mast from pumping in heavy seas and to aid in bending the mast to shape the main sail.

The second photo showing the PO flying a staysail from a track that is about three feet long and anchored only onto the foredeck.




To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Hey, can one of you guys pass me a crab?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
DwayneSpeer is offline  
Quote Quick Reply Share with Facebook
post #16 of 19 Old 07-29-2010
Junior Member
 
Join Date: Jun 2010
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
Question 10m Spinnaker

Thanks Dwayne,

I think I'm all set on the differances between the baby stay and the staysail track. Your comments were similar to others.

My boat doesn't have a baby stay.

I do have the stay sail track and would like to put it to use as the winds up here blow over twenty-five mph pretty regularly. Seems like a good alternative to reefing down the jib on a furler.

A couple more questions...

Q1 Do you know if a stay sail (as configured on the 10M) can (or should be) be used without the spinnaker?

Q2 How is the luff of a typical staysail configured, are they hank on or what?
10M2Bill is offline  
Quote Quick Reply Share with Facebook
post #17 of 19 Old 07-29-2010 Thread Starter
Old Fart
 
DwayneSpeer's Avatar
 
Join Date: Oct 2003
Location: Pasco, WA, USA
Posts: 514
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 12
 
Not an expert

I'm no expert but I believe most boats routinely fly their staysail without their spinnaker. Only a racer would routinely fly both together as is being done in my photo.

Also I just read an article in Cruising World where the fellow just added a furler to his staysail so I assure that means it's in a foil, not hanked on. That doesn't mean that you can't hank on such a sail as my buddy's HC38 has a hank on one.

Finally, a good staysail is a great alternative to a reefed genoa or jib in high winds. It's closer to the mast for better balance and is more efficient.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Hey, can one of you guys pass me a crab?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
DwayneSpeer is offline  
Quote Quick Reply Share with Facebook
post #18 of 19 Old 07-29-2010
Member
 
Join Date: Sep 2008
Posts: 94
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 7
 
The staysail I have has a wire luff and shackles to fit the eye on the strip on the foredeck. I plan to put a block on the eye on the mast and haul up the staysail with a halyard. Then push the tack forward to get the right tension on the luff.
SeaFever2000 is offline  
Quote Quick Reply Share with Facebook
post #19 of 19 Old 07-29-2010
Senior Member
 
Join Date: May 2004
Posts: 256
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 12
 
My old Chris Craft (S&S) Apache 37 also came equipped with a spinaker stay sail which I have used a couple of times. And as far as sheets and guys, as my old female friend of mine said when I asked her how can you tell which is the sheet and which is the guy....she said: Guys have poles. (Easy way to remember). :>)
mgiguere is offline  
Quote Quick Reply Share with Facebook
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the SailNet Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
Please note: After entering 3 characters a list of Usernames already in use will appear and the list will disappear once a valid Username is entered.


User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Spinnaker Takedown Basics Dean Brenner Racing Articles 0 04-28-2002 08:00 PM
Spinnaker Fundamentals Steve Colgate Learning to Sail Articles 0 06-24-2000 08:00 PM
Spinnaker Fundamentals Steve Colgate Seamanship Articles 0 06-24-2000 08:00 PM
Spinnaker Fundamentals Steve Colgate Gear and Maintenance Articles 0 06-24-2000 08:00 PM
Spinnaker Fundamentals Steve Colgate Racing Articles 0 06-24-2000 08:00 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome