SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Tartan (http://www.sailnet.com/forums/tartan/)
-   -   Tartan 30 tiller dimensions replacement (http://www.sailnet.com/forums/tartan/78527-tartan-30-tiller-dimensions-replacement.html)

ramminjammin 09-09-2011 07:59 AM

Tartan 30 tiller dimensions replacement
 
Need to replace my 1974 Tartan 30 C tiller that is delaminating.

From Tartan 30 pictures I have seen it appears that the tiller on my boat is not original .Looking at the tiller types below, I have type E on my boat but I think that it should be type F/G ?

If anyone has an original oem tiller could they please measure it and post the dimensions . ( I can get by without the butt measurements if that is difficult with the tiler still on the boat)

Please measure : butt width and height ; rise, and length.
The length is "as the crow flies" ie. not along the tiller but a straight line
(similar to the straight line in the diagram below but the measurement stops at the butt and not extending past it )

thanks for any help
Peter





]ImageShack® - Online Photo and Video Hostinghttp://img8.imageshack.us/img8/9145/tillermeasure.jpg[/URL][/IMG]


All times are GMT -4. The time now is 01:36 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012