SailNet Community - View Single Post - DIY Fuel Polishing?
View Single Post
post #2 of Old 08-24-2018
contrarian
Senior Member
 
contrarian's Avatar
 
Join Date: Sep 2011
Location: Florida Panhandle
Posts: 525
Thanks: 15
Thanked 40 Times in 38 Posts
Rep Power: 9
 
Re: DIY Fuel Polishing?

Mr. Funnel Fuel Filter. Depending on the layout of your fill tube, the hard part can be getting a tube to the bottom of the tank.
I installed a diverter valve ahead of my primary fuel filter and use a 12 volt pump to empty the tank into jerry cans. Kind of a down and dirty way to do it but it works. You can filter the fuel twice by filtering through the funnel into the jerry cans and then filter again from the jerry cans back to the fuel fill tube. My next project is to put a second diverter valve in the fuel return line and put a dedicated polishing filter between the two lines so that fuel can be polished while sailing in choppy conditions while the engine is not running.
contrarian is online now  
 
 
For the best viewing experience please update your browser to Google Chrome