SailNet Community - View Single Post - Xantrex Link 2000 acceptance voltage?
View Single Post
post #7 of Old 11-23-2018 Thread Starter
Senior Member
Bleemus's Avatar
Join Date: Oct 2015
Location: Fl
Posts: 1,374
Thanks: 30
Thanked 51 Times in 51 Posts
Rep Power: 4
Re: Xantrex Link 2000 acceptance voltage?

Originally Posted by john61ct View Post
Most old chargers have very limited adjustability.

Check out the other batt type temp charts?

Increase the temp to get closer to your desired Absorb, if you're willing to deal with Float higher than spec'd.
I think you mean decrease the temp John. The manual for the Link says in order to get 14.8 absorption I need to lower default ambient temp to 50F. Sadly this results in a float of 13.9. I have the solar that is currently on the boat set correctly using the supplied Blue Sky 3000i controller to the batteries so until I can get my other upgrades out of storage I will have to rely on solar bringing them up to float at proper levels. It made it today despite being partly cloudy. Just barely. Previous owner has start and house batteries wired in one bank. 6 Trojan T105 Plus. No redundancy. I have a lot of work to do.

Sent from my SAMSUNG-SM-G935A using Tapatalk


Boat Vinyl Lettering and Graphics
Bleemus is online now  
For the best viewing experience please update your browser to Google Chrome