SailNet Community - View Single Post - "Nordic Yacting" Clutches
View Single Post
post #2 of Old 03-27-2019
SchockT
Senior Member
 
SchockT's Avatar
 
Join Date: May 2012
Location: North Vancouver, BC
Posts: 1,984
Thanks: 3
Thanked 43 Times in 40 Posts
Rep Power: 8
 
Re: "Nordic Yacting" Clutches

Honestly, if it were my boat I would be looking for any excuse to get rid of those clutches. In fact, on my last boat I did just that. I had a similar type of rope clutch made by Schaeffer. We nicknamed them "suicide clutches" because the higher the load on them, the harder they are to open. That's not a good thing when you really need to release them in a hurry! Not only that, but the handles sticking up were great at fouling sheets, catching and ripping spinnakers, not to mention very uncomfortable to fall on!

I replaced them with a set of Spinloc XTS clutches that are a dream to use in comparison. Garhauer makes some nice looking clutches that are a bit cheaper.

It really isnt that hard to replace them. Just fill the old holes with thickened epoxy, and drill new holes for the new clutches.

There is zero chance you will find anything similar new, so unless you get lucky and find some that have been removed from another boat, you are going to be mismatched.

Time to upgrade IMHO!




Sent from my SM-G960W using Tapatalk

2011 Jeanneau 39i Azura
SchockT is online now  
 
 
For the best viewing experience please update your browser to Google Chrome