Re: How to make a rolling boom, well..not roll?
I think your first step would be to take the end of the boom off and see what it is like inside. The stainless fitting that swivels may be held in place with a nut, and you may be able to just torque it down to lock it in place.
Of course looking at the corrosion around the screws, it could be a challenge to get them out without stripping them. They probably have not been removed since 1973!
Sent from my SM-G960W using Tapatalk
The boat is at the shipyard getting the bottom paint done...I will look into it next week when I get the boat back.
S/V Cuajota - 1975 WD Schock Santana 30
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Last edited by NewportNewbie; 05-05-2019 at 06:52 PM.