SailNet Community - View Single Post - Any CDI reefer II users?
View Single Post
post #2 of Old 08-31-2010 Thread Starter
4cylindersoffury
Junior Member
 
Join Date: Aug 2010
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
 
Ive got it- after some relentless searching and some creative thinking i found this little bad boy

"I have the crusing design 2 on my 30 Hunter. The head stay track has two luff tracks and the un-used track is to send a 'car' that unlocks the top of the sail from the furling. I hook the car to a halyard and a messenger line to the bottom of the car send it to the top of the stay and the 'car' trips the lock then I pull the sail down the luff track, and use the messenger line to pull my car back down un-hook the halyard, stor the car till ready to raise the sail again. The car has a arrow to show if you want it to raise or lower the sail. When you raise the sail, the car hooks the top of the sail's slide and drags the sail to the top then exits out of the top (after the sail locks in place) and is lowered by the messenger line to be stored till the next time the sail has to come down. I hope this is clear enough to understand, the system works great once you have done it and see the way it works. good luck"
4cylindersoffury is offline  
 
 
For the best viewing experience please update your browser to Google Chrome