SailNet Community - View Single Post - Semco teak sealer for teak decks
View Single Post
post #2 of Old 03-06-2011
RichH
Senior Member
 
RichH's Avatar
 
Join Date: Jul 2000
Location: Pennsylvania
Posts: 5,067
Thanks: 54
Thanked 331 Times in 315 Posts
Rep Power: 21
   
I have a 'teakey' ... all decks, etc. are teak.
Have been using Semco "natural' for about 8 years, keeps the deck 'tight', non slippery ... allows the wood below the Semco to become wetted (traction!!!!).
If you retard the UV destruction of the surface cells you will have very little 'erosion' of the teak as you get when the deck goes 'gray'. At now $40/ board ft. for quality teak, Semco is cheaper. I mix 1/2 'natural' with 1/2 goldtone. Once every 2 yrs. I strip with diluted TSP to rebuild the natural color ... since the teak isnt much degraded by UV the TSP 'etch' is very minimal.

Only downsides - recoat each 6 mos. and it will eventually 'transfer' to the soles of your deck shoes.
Good stuff.

AT one time I used to mix 1/3 Semco, 1/3 Teakwoner, 1/3 Thompsons water seal ... no diff.
RichH is offline  
 
 
For the best viewing experience please update your browser to Google Chrome