Join Date: Mar 2006
Location: New England
Thanked 19 Times in 15 Posts
Rep Power: 18
I'd try and get a replacement transducer that will fit your thru-hull first. BTW, you do lose quite a bit of power on a through-the-hull setup, and it can be seriously affected by the hull material. If the hull is cored, it won't work. If there are any voids or bubbles in the laminate below the transducer, it won't work, etc...
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.