Feeding my watermaker
When underway my PUR 40E watermaker makes a clunking sound and the output falls off. I assume this is the pump cavitating because of insufficient flow. The manual says to install a scoop on the intake through-hull. However, my next haul-out won't happen for a long while.....
Could I install a small pressure-switch pump between the through-hull and the pre-filter to solve this problem? Would doing so create others?
|All times are GMT -4. The time now is 07:15 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012