SailNet Community banner

bleeding air

  1. Problems Bleeding Fuel Lines in Yanmar 3GM30F

    I changed my fuel filter and loosened the bleed screw on top of the filter. I operate the manual pump priming lever on the fuel pump but I feel no resistance. I rotated the crankshaft clockwise (several times) and pressed the lever after each turn but still no resistance. I removed the fuel...
  2. Volvo MD2010 won't bleed

    Hi, Just back from a cut short weeklong cruise because the engine will not run past about 16 to 1800. It would run faster but only for a little time. Being only 8hp to start with that equates to about 2.5 knots with no headwind. I replaced the prefilter Racor, it was a bit dirty. No change, I...