SailNet Community banner
deck fill
1-3 of 3 Results
  1. Gear & Maintenance
    I would like to find an adapter to plug our water fill hose into the deck fill. We have been living aboard for 4 years and would like to start taking showers aboard instead of constantly walking to the Marina office. Since there are four of us, we'll have to refill our tanks frequently. It would...
  2. Gear & Maintenance
    The deck on my boat is made up of 3/8 inch mesh/epoxy covered with gel coat. The interior is some decorative plastic fabric over a thin plastic shell. The area between these layers is 1/4 inch balsa. When I got the boat there were many top side leaks. The water moves around in the balsa core...
  3. Gear & Maintenance
    Went to have the holding tank pumped out for the first time in about 9 months. The fitting and cap are 30 year old aluminum. I have a good bronze spanner wrench but the cap would not budge. I sprayed it with PB Blaster and will try again. Other than adding length to the handle for more...
1-3 of 3 Results
Top