SailNet Community banner
1 - 1 of 1 Posts

· Daniel - Norsea 27
Joined
·
1,255 Posts
Reaction score
533
I used G10 for the base too. I didn't use studs, nor did I use bolts through the hull.

I drilled through the bolt holes, then drilled a little larger area for the bolt heads so they would be recessed into the G10 plate.

Next time I haul out, I will have 6 or 7 more to replace and plan to install the same way. MaineSail's instructions were great help.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top