SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
725 Posts
Sounds pretty new. I would pump the holding tank and flush lots of water through the head as your pumping it out. Maybe it will clear what ever is stuck in the valve. Then if you have to take it apart you have cleared out most of the crud and you are just dealing with sea water. Then review the directions on what you can flush.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top