SailNet Community banner

1 - 6 of 6 Posts

·
Registered
Joined
·
994 Posts
Discussion Starter #1
Hey all,
I have a renovation project with a Helms 24. I removed the plate that holds the mast into the step to rum some new wires. I found an application of some material
that surround the are where the plate fits into the mast tube that is very hard and was obviously cast and hardened into the area to "Seat" the plate so the it fits the mast better. Can anyone tell me what that material is or what its called so that I can get some and finish up my mast project.
Your help will be very appreciated!
Thanks!
"still buried in 5 new inches of snowfall in NY"!
Randy
 

·
Registered
Joined
·
407 Posts
It sounds like a bedding compound. Probably a polysulfide (3m 101) or Dolfinite. Can you take a picture of the "cast" material? Can you take a picture of the area involved so we can see the parts? What colour is the material?
 

·
Registered
Joined
·
994 Posts
Discussion Starter #3
Sure I can take shots so you can get a better sense of this. The material is gray, is very hard and brittle and dense- Like concrete or pure Portland cement.
 

·
Registered
Joined
·
5,856 Posts
<TABLE class=dsR103 height=224 cellSpacing=1 cellPadding=9 border=0><TBODY><TR><TD class=dsR109>Marine-Tex, the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to the highest standards to meet the harsh demands of the marine and industrial environments, and solve many problems for home, auto and hobby applications.</TD><TD class=dsR107></TD></TR></TBODY></TABLE><TABLE class=dsR99 cellSpacing=0 cellPadding=10 width=550 align=center border=0><TBODY><TR><TD class=dsR42>
Marine-Tex is a creamy paste consistency that can be applied on vertical or horizontal surfaces, easily fills gaps, and can be shaped to rebuild damaged components. Marine-Tex paste provides waterproof repairs that can be used with fiberglass tape or cloth to bridge holes and reinforce structural repairs as needed. Emergency and permanent repairs to machinery and equipment, hulls, decks, stripped fasteners, piping and tanks are all easily accomplished with the mighty repair kit. Marine-Tex can be sanded or ground to shape, tapped and drilled, and finished with most common paints and coatings.

It made in both wihte and gray.​
</TD></TR></TBODY></TABLE>
 

·
Registered
Joined
·
103 Posts
Another possibility

I think there's a good possibility that it is spartite. The website doesn't say anything about colors, but I could swear I have seen it in different colors. It dries incredibly hard.

Spartite
 
1 - 6 of 6 Posts
Top