SailNet Community banner
1 - 1 of 1 Posts

· Registered
846 Posts
Reaction score
Justified's method is best for teak. The only problem is, after you clean the surface with acetone or thinner the traces of the cleaner should evoporate completely. But waiting too lon will cause the oils to reach to thesurface again. You can also use alcohol for cleaning. After cleaning the surface with acetone, alcohol or thinner wait for evoporaiton and apply a coat of epoxy and let it dry. You can later apply a second coat of epoxy and attach them to the fiberglass.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.