SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
916 Posts
Giu,
There is something wrong with your statement that 1mm of stretch = 5% of breaking load. This has to be 1mm of stretch per 1 meter of length, or some other ratio. I used to build a system that used a 1/4" cable 800 feet long. Proper tension on that system was to stretch the cable 8 FEET!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top