SailNet Community banner
1 - 1 of 1 Posts

· Super Moderator
4,778 Posts
Reaction score
First thing to do is to get up to Brooklyn and get a book or two on joinery and boat interiors at the Woodenboat store. If you have a chance, get down to Tennant's Harbor & check out the boat they've mocked up at the boatyard. (about a 60' one, IIRC) With only 28', you don't have too much to work with, so making it all count is key. The guys at Billings will probably have some ideas too. Think it all out before you remove too much. Putting stuff back in takes a LOT longer than ripping it out.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.