SailNet Community banner
1 - 1 of 1 Posts

·
One of None
Hunter 34
Joined
·
8,671 Posts
after the last coat, pull the tape up and diagonally away.the BC should still be soft enough that the tape will come away. This is where cloth tape would be great. A pull scraper will help clean the line better than trying to use a knife. When it is cured and really hard it will be very hard clean up the tape line but scored with knife and scraping should still work. Apply bottom paint right away or it may not bond to the BC. A line of tape slightly above the BC edge. Remove tape right after. Easy! Right? Lol

Edit, don't mess with the through hull unless it really needs replacement
 
1 - 1 of 1 Posts
Top