SailNet Community banner
1 - 1 of 1 Posts

· Asleep at the wheel
Joined
·
3,016 Posts
Reaction score
707
I think Brian has it exactly right. The way you are wired will favor (cause more drain on) batteries 1 and 2. You don't have the same impedance on each bank of batteries. Wiring it the way Brian shows in his diagram will cause a more even, matched draw assuming the horizontal wires are the same size and the vertical wires are the same size (i.e., the one connecting the upper left to the upper right and the one connecting the lower left and lower right are the same size; and the one connecting the upper left and lower left is the same size as the one connecting the upper right and lower right).
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top