SailNet Community banner
1 - 1 of 1 Posts

·
Tartan 27' owner
Joined
·
5,238 Posts
Check on eBay for stock Biminis.

Changing your sheeting from boom end to more forward is not a trivial change. I'd try to live with the traveler where it is. Not sure what you'd gain by moving the traveler track further aft.

For Balsa cored decks the recommended procedure is to over drill any deck holes then fill with thickened epoxy, let cure and re-drill through the epoxy patch. This should keep moisture from getting to the Balsa core. End grain Balsa can take a lot of compression which is why it was/is widely used.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top