SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,668 Posts
Like Denise and Wilson, I can highly recommend the PSS Shaft Seal. I installed one on our Sabre 28 and it was one of the first things that I installed on our Sabre 38. It's easy to install and extremely reliable. I installed a new shaft, cutlass bearing (hint: store in freezer prior to installing; lube with dish soap for install), and shaft seal in about 2 hours with no need for a second set of hands. Removal of the old fittings took about the same amount of time. Like any other fitting, the shaft seal needs to be monitored for wear, leaks, etc.

I hate anything dripping in my boat. Makes me nervous, but more diligent.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top