SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,942 Posts
you will need to pull the shaft to replace it. but as you said its a great time to do things like cutlass, shaft seal etc. one thing you might want to do while its out of the water shaft related is get the prop checked for balance, shaft for straightness, etc.

and paint the bottom while its out if it needs it.

then check all the seacocks and other thru hulls

then check the keel bols and fairing

then check the rudder and rudder bearing

then..... see where this is going
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top