SailNet Community banner
1 - 5 of 5 Posts

·
Registered
Joined
·
980 Posts
Discussion Starter · #1 ·
I recently acquired a C&C 24. It needs a a good amount of work. It does not have a mast but I have a few masts around my place that I could fit to it.

Does anyone know the length of the mast on this boat?

Would it hurt to put a taller or shorter mast on?

What are the pros and cons of a taller or shorter mast?
 

·
Telstar 28
Joined
·
992 Posts
Did you try calling C&C.. as they are still in business..sort of... and could probably give you that information.

A different mast might hurt, but it depends.
 

·
Senior Member
Joined
·
19,484 Posts
I'd not be expecting the "new" C&C to have a lot data hanging around with regard to the real C&C line from Canada. From Mauipro sailiong the rig dimensions are/were:
C+C 24
"I" 29.0 ft (distance deck to masthead)
"J" 10.5 ft (distance forestay to mast base)
"P" 23.5 ft (distance gooseneck to full hoist main)
"E" 8.5 ft (length of foot of main along boom)

This should give you an idea how well what you have available may fit.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top