SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,281 Posts
shows it is the fuel return line, should go back to the fuel tank or to a tee on the fuel supply line , which has very little pressure in it. could be replaced with a hose. why do you want to replace it? if it is leaking then it needs to be replaced or repaired, if it is not broken then don't fix it.
 

·
Registered
Joined
·
3,281 Posts
take it off and have a shop re silver solder the joint. put on new copper gaskets on the banjo fitting. the original was steel tube silver soldered or brazed to the end fitting
 
1 - 2 of 2 Posts
Top