SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,106 Posts
Dave, thankfully there is a simple solution for this- clean your tank and fill it with fresh diesel. If there's an inspection port on the tank (and there should be) it's a simple matter of opening it up and removing the old diesel. Then wipe it out with rags soaked in kerosene, taking care not to leave any bits of rag in the tank. Fill it up with new diesel and you're ready to go! You might consider adding a biocide after the cleaning to prevent further fouling of the tank.
 
1 - 1 of 1 Posts
Top