SailNet Community banner
1 - 1 of 1 Posts

·
Member
Joined
·
27 Posts
Discussion Starter · #1 ·
Friends and experts - here are two pics (port and Stbd) of the strut holding my cutlass bearing in place. Boat is a Yorktown 35 - 1974 version
My question to you is: based on the pictures below, do you believe I could remove the propeller and the 6 bolts holding the strut in place(3 on each side), remove the strut from the boat and the shaft, replace the cutlass bearing in the strut and reassemble - all without having to undo the shaft from the transmission and associated items typically associated with same?

Strut Stbd Side

Strut Port Side

Thanks for any suggestions/thoughts you may have!
 
1 - 1 of 1 Posts
Top