SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
140 Posts
The C-80 should give you a good volume of water at medium pressure range, 20-40 psi. If you want more pressure look at the ShurFlo Blaster and Jabsco Wash Down pumps.

I'm wondering if the vented loop is still causing a problem. It's easy to test, just cover the air inlet with a piece of tape and run the pump.

Assuming your toilet is a typical manual toilet with the pump connected to the bowl by a short hose, it will work better if you put the loop in the hose between the pump and the bowl rather than in the intake line. It will still prevent water from siphoning into the bowl but the pump won't be sucking air.

In toilets where you can't put the vent between the pump and the bowl, as on most electric toilets, you should use a vent with a solenoid that closes the vent when the pump runs.
 
1 - 1 of 1 Posts
Top