SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
180 Posts
In-hull transducers bedded in epoxy are the only way to go. Just make sure that the rough fiberglass roving in the hull is sanded smooth for good contact and to remove any resin wax. Dick Elliott, I28 "specialK".
 

·
Registered
Joined
·
180 Posts
I certainly don''t disagree with the need to keep bubbles out of the epoxy but after fighting years of mineral oil leaking onto the carpet and the depth sounder quitting in spite of numerous efforts to seal the tube, I''m delighted with the epoxy. Dick Elliott.
 
1 - 2 of 2 Posts
Top