SailNet Community banner

1 - 4 of 4 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
I am in need of a boatyard that allows DIY and use of independent workers to complete the interior of my old 56 foot steel ketch. She is 56/15/9 and weighs about 15-20 tons.

No glitzy marina features are needed-- just need a good working yard close to a West Marine and Home depot.

Any recommendations?

Thanks,

Keith
 

·
Registered
Joined
·
8 Posts
boatyard

We were very pleased with Charlotte Harbor Boat Storage, Inc, Placida,FL. Don't know if they can handle your boat. PH # 941-828-0216. Worth a call. Can live and work on the boat, Home Depot very close, West Marine not too far. Best of Luck
 

·
Registered
Joined
·
15 Posts
SE Florida Boatyard

<TABLE cellSpacing=0 cellPadding=0><TBODY><TR><TD width="15%" height=21>Cracker Boy Boat Works</TD><TD width="7%" height=21>561-465-7031</TD><TD width="13%" height=21>1124 Avenue C</TD><TD width="14%" height=21>Riviera Beach, FL 33404</TD><TD width="20%" height=21>Boat Yard</TD></TR></TBODY></TABLE>
They allow DYI, Liveaboard, and West Marine and Home Depot are not too far away. We will be pulling out there this spring for a bottom job.


Good Luck.

Keith
s/v Take Five
 

·
Wandering Aimlessly
Joined
·
22,037 Posts
I believe there is also a Cracker Boy at Fort Pierce also. West Marine is close, but not Home Depot.
 
1 - 4 of 4 Posts
Top