SailNet Community banner
1 - 1 of 1 Posts

· Registered
Joined
·
4,728 Posts
Reaction score
1,702
A mixing elbow made of iron plumbing bits is easy to make and replace. Should be good for 3 or 4 years and shows distress long before it fails. If you can go down off the manifold (injecting into) a piece of rubber hose onto a SS can, you got it made. Lots of talk on 'I hate boats' about this. You can buy big buck parts or make your own with a bit of ingenuity. Every body here has an opinion about this. Wagging a 2 'pipe doesn't sound like good engineering to me!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top