SailNet Community banner
1 - 1 of 1 Posts

· Kynntana (Freedom 38)
Joined
·
976 Posts
Reaction score
346
By maybe some coincidence, I have an Edson and the clevis holding my throttle to the cable broke yesterday. When I ran the engine, it was stuck at 2000 rpm. The only way I could control it was from shifting the lever at the engine, which I could reach from the companionway. Did you try that to see if you could replicate the issue? There was rubbing on the bolt from the chain that controls the wheel assembly. You might be having "sticking" problems similar to what caused my bolt to shear. Just a thought. Not sure why yours would be jumping out of gear. I'm calling Edson tomorrow to see if they can help...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top